Kwikset Powerbolt 2 troubleshooting guidelines.The issue of “not operating after battery change” should be resolved as a result of this. If you’re replacing the batteries after seeing a low battery notice on the lock, press the Program and A buttons for 5 seconds each before replacing the batteries. This should help your Kwikset lock’s battery performance difficulties. If, on the other hand, the batteries aren’t working after you’ve replaced them, double-check that they’re installed correctly and that you’re using the correct batteries.Īs previously stated, lithium batteries are not advised thus, if your lock uses lithium batteries, remove them and replace them with high-quality AA alkaline batteries. Repeat step two until you hear “Restore factory settings is complete” or you see a green light on your Kwikset lock.Ĭhanging the batteries in your Kwikset lock should keep it running well.Insert a paperclip or similar object into the small hole in the bottom corner of the lock.Press and hold down the program button on the inside of your deadbolt.

You’ll also need to know your master code and be able to access the inside of your door. To reset your lock, you will need a paperclip or something similar to fit in the small hole on the edge of the lock. If your Kwikset lock is still not working after you change the batteries, one of the most common culprits is that the default settings have been altered. It’s also possible that you’ve accidentally changed some settings on your keypad lock, which is what we’ll focus on here. While we wish it was a simple solution, there are many things that can cause this problem. It happens to the best of us: you’re trying to get into your house and your keyless lock won’t open. If you don’t do this, the lock may not recognize the batteries and therefore won’t work at all. This will help the system get reset so that it can function properly. This will reset all of the settings on your lock. If that doesn’t work, press and hold both the program button and button “A” before inserting the batteries.Press and hold the program button before inserting the batteries.If you find yourself in a situation where your lock won’t work after changing the batteries, there are a couple of things you can try: The worst part about Kwikset locks is that you have to take the whole thing apart in order to get the batteries in. Press the Program Button and Button “A” Before Inserting the Batteries If it still won’t work after changing the batteries, check to confirm that the batteries are not mixed with each other. I would recommend you to use AA batteries instead of Lithium ones. If your lock still isn’t functioning properly after inserting new batteries, try installing high-quality batteries rather than standard ones. If any of your batteries are installed incorrectly, remove them and reinstall them with the positive end facing out toward you. The positive end of each battery should be facing out toward you and away from the lock.

You should see four batteries installed in two slots on each side of the lock. To do so, remove the cover plate with a flathead screwdriver and look inside.

Check to make sure all four of your batteries are installed correctly. Most kwikset locks require four AA batteries. Ensure the Batteries Are Correctly Installed

Conclusion How to Troubleshoot a Kwikset Lock that Won’t Work After Battery Change 1.

How to Troubleshoot a Kwikset Lock that Won’t Work After Battery Change.

Do kwikset keypad lock not working